ISW type single stage pump

ISW type single stage pump

ISW type single stage pump

This series of pumps are single-suction, single-stage, direct-connected centrifugal pumps, with a total of 34 basic types and 242 specifications. It is used to pump clean water or non-corrosive liquids with a maximum medium temperature of 80°C. It is most suitable for occasions with high inlet pressure (such as air conditioning, heating and other closed cycles). The pump shaft seal adopts mechanical seal.

ISWR type hot water pump cools the shaft seal part (using normal temperature water), and the medium pumped can reach 130℃.

The shaft seal of ISWY type clean oil pump can use skeleton oil seal or mechanical seal.

   ISW type single stage pump parameter list

Product model Impeller
type
Flow rate
M³/H
Lift
M
SpeedR
/MIN
PowerKW efficiency
%
Required NPSH
M
Total mass
KG
Shaft power Motor power
50-32-125 O 7.5 twenty two 2900 0.96 2.2 47 2.0  95
12.5 20 1.13 60 2.0 
15 18.5 1.26 60 2.5 
A 7.2 20 2900 0.85 2.2 46 2.0  90
11.9 18.2 1.02 58 2.0 
14.3 16.8 1.13 58 2.25
B 6.7 17.5 2900 0.71 1.5 45 2.0  82
11.2 15.9 0.86 56 2.0 
13.4 14.7 0.96 56 2.05
...
65-40-250 O 15 82 2900 9.05 15 37 2.0  280
25 80 10.9 50 2.0 
30 78 12 53 2.5 
A 14.1 72 2900 7.55 15 36.5 2.0  280
23.4 70.2 9.14 49 2.0 
28.1 68.5 10 52.4 2.26
B 13.1 62.7 2900 6.21 11 36 2.0  270
21.9 61.1 7.64 47.6 2.0 
26.2 59.6 8.34 51 2.07
...
125-100-250 O 120.0  87.0  2950 43.0  75 66 3.8 820
200.0  80.0  55.9 78 4.2
240.0  72.0  62.8 75 5.0 
A 112.0  75.8  2950 35.0  75 66 3.8 820
187.0  69.7  45.3 78.2 4.08
224.0  62.7  52.1 73.5 4.6
B 104.0  65.6  2950 28.4 55 66 3.8 675
174.0  60.6  36.9 78 4.0 
209.0  54.6  42.5 73 4.4







Top Products



Copyright(C)2025 , Zibo Luzhong Industrial Pump Factory All Rights Reserved.  Supported by  ChemNet  ChinaChemNet Toocle Copyright Notice