SH series and S series are single-stage, double-suction, horizontal split centrifugal pumps, suitable for transporting clean water and non-corrosive (or weakly corrosive) liquids. The maximum allowable temperature of the medium is 80°C. After cooling water is introduced into the bearing bodies at both ends, hot water below 130°C can be transported. Changing the manufacturing materials of the sealing ring, sleeve and impeller can transport muddy water containing mud and sand; changing the manufacturing materials of the pump body and pump cover can increase the inlet pressure of the pump, and can be used in closed cycle situations such as air conditioning and heating. Copper impeller and copper sealing ring for transporting oil.

The shaft seal of the pump adopts soft packing seal, or mechanical seal can be used. Viewed from the direction of the motor, the water inlet of the SH-type water pump is on the left (counterclockwise rotation); the water inlet of the S-type pump is on the right (clockwise rotation). The rotation direction of the pump can be changed according to user requirements.